



1750 kg Hydraulic Brake Hub Stub Kit 5×4.5″ PCD Dacromet for Boat & Jet Ski Trailers — AU/NZ
Price on Request
Load Capacity: 1750KG
PCD: 5×4.5″
Finish:Galvanized
1750 kg Hydraulic Brake Hub Stub Kit, 5×4.5″ PCD — for Australian and New Zealand Boat Trailers
This 1750 kg hydraulic brake hub stub kit is a per-side drum-brake stub assembly rated for 1750 kg GVM single-axle boat and jet-ski trailers in Australia and New Zealand. The spindle is forged steel, the hub and brake drum are cast iron, and all steel parts carry a Dacromet zinc-flake coating engineered for saltwater and coastal exposure. It mounts to the trailing arm of an existing torsion or leaf-spring chassis and accepts the standard 5×4.5″ (114.3 mm) Australian wheel bolt pattern. Sold per side — replace only the damaged hub, drum or spindle after bearing failure, impact or corrosion instead of scrapping the whole axle.
Key features
- Hydraulic drum brake. Plumbed into the trailer’s existing hydraulic actuator coupler; matches the AU/NZ boat-trailer brake standard.
- 5×4.5″ (114.3 mm) PCD. Direct fitment for common Australian boat trailer wheels; 1/2″-20 UNF studs to AU spec.
- Dacromet coating, not plain paint. Zinc-flake surface treatment with high salt-spray resistance, intended for boat trailers that launch and retrieve in salt or brackish water.
- Per-side replacement. If one hub seizes, one drum cracks or one spindle bends, you buy one hub stub kit — not a complete axle beam.
- Light boat and jet-ski class. Sized for runabouts, tinnies, bowriders and jet-ski trailers up to 1750 kg GVM.
- OEM from a Chinese factory. Spindle length, hub offset, drum size and stud pattern are customizable to your drawing or sample for AU/NZ trailer builders.
Specifications
| Parameter | Typical specification |
|---|---|
| Rated axle load (pair) | 1750 kg (3858 lb) GVM |
| Load per hub stub kit | ~875 kg (1929 lb) per side |
| Brake type | Hydraulic drum brake, plumbed to actuator coupler |
| Brake drum | 10-inch cast iron hydraulic drum (AU 1750 kg class) |
| Wheel PCD | 5×4.5″ (5×114.3 mm) |
| Wheel studs | 1/2″-20 UNF (AU standard) |
| Spindle | Forged steel, tapered bearing journals |
| Hub | Cast iron, fitted with tapered roller bearings and inner oil seal |
| Surface treatment | Dacromet zinc-flake coating (saltwater / marine grade) |
| Salt-spray resistance | 500+ hours to red rust (typical Dacromet, per coating spec) |
| Mounting | Weld-on or bolt-on to trailing arm, per customer drawing |
| Suitable applications | Australian / New Zealand boat trailers, runabouts, tinnies, bowriders, jet-ski trailers |
| Country of manufacture | China — OEM factory, export packaging |
Looking for another stub axle or hub kit?
We manufacture a wider range of trailer stub axles and hub kits — unbraked idler hubs, electric drum brake stub axles, European 200×50 / 250×40 brake kits and American 2200–7000 lb stub axles. Send us your drawing, sample or required load rating and we will quote the matching hub stub kit or complete stub axle for your trailer project.
FAQ
1. Is this hub stub kit sold as a pair or per side?
It is sold per side. A 1750 kg GVM single-axle trailer uses two kits (left and right). If only one side is damaged after a bearing seizure, drum crack or impact, you can order just one replacement side instead of a whole axle — this is the main cost advantage of a stub axle design.
2. What is Dacromet, and why is it used on boat trailers instead of paint?
Dacromet is a zinc-flake coating applied by dip-spin and cured at low temperature. Unlike ordinary paint, it does not chip easily, creates no hydrogen embrittlement on high-strength steel, and typically delivers 500+ hours of salt-spray resistance to red rust. For boat trailers that repeatedly enter salt or brackish water, Dacromet outlasts painted or powder-coated bare steel and reduces surface rust on the spindle, hub and drum.
3. Will this fit my existing Australian boat trailer with 5×4.5 wheels?
The PCD and stud pattern (5×4.5″ / 114.3 mm, 1/2″-20 UNF) match the standard Australian 1750 kg boat-trailer fitment. The remaining variables are spindle length, hub offset and brake drum dimensions, which must match your existing trailing arm and backing plate. Send us a photo or drawing of your current hub and we will confirm compatibility before quoting.
4. Does this hub stub kit work with my existing hydraulic brake actuator?
Yes — the drum is a standard AU hydraulic drum brake and plumbs directly into the trailer’s existing hydraulic actuator coupler with brake lines and wheel cylinders. If you are rebuilding a trailer from scratch, you will also need the matching actuator coupler; tell us your setup and we can advise on the complete brake circuit.
5. Do you supply OEM or custom hub stub kits for trailer manufacturers?
Yes. We are a Chinese OEM factory. Spindle length, hub offset, drum size, PCD, stud pattern and coating are all customizable from your drawing or physical sample. MOQ and lead time depend on the specification — send us your requirements and we will reply with a quote and production lead time for the AU/NZ market.






