Blog
How We Pack Trailer Axles Into a 20GP Container: Sea Freight Packaging That Survives the Voyage

How We Pack Axles Into a 20GP Container: Sea Freight Packaging That Survives the Voyage
A factory-level look at the inspection, steel-rack packaging, container loading calculations, and unloading checks that get a full container of torsion axles from our workshop to your dock without damage.
Direct Answer: How Do We Pack Axles Into a 20GP Container?
Every axle passes a visual inspection and is stretch-wrapped before packing, then loaded onto custom steel-frame pallets sized to the axle length — 25 axles per pallet for European 250×40 torsion axles. One 20GP container takes 5 pallets, or roughly 125 axles at about 85 kg each, with the loading plan calculated in advance to distribute weight evenly across the container floor.
Quick Summary
Sea freight packaging for trailer axles involves four stages: appearance inspection and stretch wrapping, custom steel-frame pallet construction, a pre-calculated container loading plan with proper weight distribution, and a documented unloading checklist at the destination.
How Do We Inspect and Wrap Every Axle Before Packing?
Every axle undergoes an appearance inspection before packing, and each unit is individually wrapped in stretch film to lock out moisture and prevent surface contact damage during transit.
The inspection covers weld consistency, galvanizing finish, hub and spindle condition, and load-marking legibility. Axles that fail any point do not enter the packing line. Once cleared, each axle is wrapped in plastic stretch film — this serves three purposes on a sea voyage:
- Blocks salt air and condensation from reaching the galvanized surface for the weeks the cargo sits inside a steel box crossing the ocean
- Prevents axle-to-axle contact scuffing when pallets are handled by forklift at ports
- Keeps road grit, packaging debris, and handling grime off the finished surface until you unwrap at your facility
Stretch film is applied over the full axle body, with extra wraps at the hub and spindle ends where bare metal exposure is most likely.
How Do Steel Frames and Custom Pallets Keep Axles Secure in Transit?
We build custom steel-frame racks sized to each axle length, so every axle sits in its own supported position and cannot roll, slide, or strike its neighbour even when the container is tilted or jarred at sea.
Generic timber pallets fail for axles — the load is long, heavy, and concentrated at the ends. Our approach:
- Steel-frame construction: welded rectangular tube frames with cross-members spaced to the axle load points, rated to carry 25 axles per pallet without flexing
- Length-matched design: the rack is fabricated to the axle length, so the 250×40 European torsion axles — kept within container door width — load and unload cleanly without angling or forced entry
- Separators between layers: each tier of axles is divided with spacers so hubs and brake drums never bear on the axle below
- Strapped and wrapped as a unit: the finished pallet is banded and film-wrapped as one rigid block, forklift-accessible from all four sides
One completed pallet measures approximately 1.8 × 1.15 × 2.2 m — about 4.5 m³ — and holds 25 axles.
How Is the 20GP Container Loading Plan Calculated?
For full-container shipments we calculate the complete loading plan before production finishes: axle count, pallet positions, and weight distribution are all mapped in advance so no container leaves our yard unplanned.
| Item | Specification |
|---|---|
| Axle type (example) | European 250×40 torsion axle |
| Axle length | Kept within container door width for direct loading |
| Axles per pallet | 25 |
| Pallet dimensions | ~1.8 × 1.15 × 2.2 m (≈ 4.5 m³) |
| Pallets per 20GP | 5 |
| Total axles per 20GP | ~125 |
| Unit weight | ~85 kg per axle |
| Cargo weight (approx.) | ~10.6 metric tons plus tare |
Weight distribution matters as much as volume. Five pallets are positioned to keep the load centred over the container’s longitudinal axis — heavier pallets low and forward of centre, nothing stacked off-balance against the door side. A 20GP offers roughly 25–28 m³ of usable volume, so 5 pallets at ~4.5 m³ each fill the box efficiently while staying well inside gross weight limits.
Factory floor note: we ship a full container — or consolidated LCL for several customers — almost every week, so the loading plan for your order is built from a procedure we run constantly, not a one-off experiment.
What Should You Check When Unloading the Container?
At unloading, verify the container seal is intact before opening, count pallets against the packing list, and inspect the first axle off each pallet for transit damage before signing the delivery receipt.
The checks that protect your claim window and your inventory:
- Seal and container condition: photograph the seal number and any container damage before the door is opened; a mismatched or cut seal must be noted on the delivery document immediately
- Quantity against packing list: confirm 5 pallets / ~125 axles (or per your order) before the truck leaves — shortages are far easier to resolve same-day
- Random damage inspection: unwrap and spin-check axles at random positions in the load — front, middle, and rear of the container — not just the ones nearest the door
- Forklift handling: lift by the pallet fork pockets only; never drag an axle off a rack by its spindle or brake flange
- Document everything: any dent, bent flange, or moisture staining gets photographed and reported to the supplier and forwarder within the claim period — verbal reports after the fact are unenforceable
Need Axles Shipped With a Packaging Plan Built In?
Packaging is part of the product. Browse our torsion axle range — every order ships with a steel-rack packing plan matched to your axle dimensions, quantity, and destination port, and we will confirm the loading scheme with you before your container is sealed.
Frequently Asked Questions
How many axles fit in a 20GP container?
For European 250×40 torsion axles, one 20GP container holds approximately 125 axles — 25 axles per pallet across 5 pallets. The exact count is confirmed in the loading plan calculated before shipment.
How much does one torsion axle weigh for freight calculation?
A single European 250×40 torsion axle weighs approximately 85 kg. A full 20GP load of ~125 axles totals roughly 10.6 metric tons of cargo weight before pallet tare.
What are the pallet dimensions for axle shipping?
One steel-frame axle pallet measures approximately 1.8 × 1.15 × 2.2 m, or about 4.5 m³, and carries 25 axles separated by spacers to prevent hub-to-tube contact.
How are axles protected from rust during sea freight?
Every axle passes an appearance inspection and is individually stretch-wrapped before palletizing, which blocks salt air and condensation from the galvanized surface for the full ocean transit.
Do you ship small orders that don’t fill a container?
Yes. Alongside weekly full-container shipments, we consolidate less-than-container-load (LCL) cargo for several customers in the same shipment — small orders are packed to the same steel-rack standard and merged into the weekly consolidation.